Excellent quality DTF ink for DTF printers
It has high color reproduction, washability, and environmental protection, and will not clog the nozzle. It is more economical and can save 10-20% of usage compared with ordinary ink.
KingJet premium DTF ink improves your clothing printing
Micro-precipitated DTF White Ink
Micro-precipitated DTF White Ink is developed and produced by KingJet specifically for EPSON DTF printheads and high-quality garment printing. The white ink has excellent fluidity and is not prone to clogging, offering the greatest potential to enhance the quality of your T-shirt printing.
Advantages：
1. The sedimentation is slow, with the sedimentation amount reduced by 60% to 70% compared to ordinary white ink.
2. After long-term transportation and storage, it is prone to shaking and will return to good condition.
3. After the printer is shut down, there is no need to add moisture liquid to the ink stack. The standby time is 15 hours, and it can start printing immediately after being turned on.
4. This type of ink offers excellent printing smoothness, high whiteness, and a high coverage rate, requiring few cleanings, which in turn leads to a longer service life of the printhead.
Parameters:
- Ink Color: white
- Ink Volume: 1L/bottle (customized packing solutions are available)
Technology Principle of Micro-Precipitated White Ink
1. The micro-precipitated white ink effectively wraps the nano-titanium dioxide particles with a super dispersant to achieve stable dispersion. The charge at the end of the dispersant makes the titanium dioxide nanoparticles repel each other to avoid particle aggregation and precipitation.
2. The micro-precipitated white ink is developed and produced with proprietary technology. Compared with conventional white ink, its system is different and the compatibility between the two inks is poor. When replacing, the ink circuit system needs to be cleaned to avoid excessive ink mixing.
Parameters of Micro-precipitated White ink
| Physical and chemical parameters | |
| Viscosity (Cp25℃) | 4-6 |
| Surface Tension (mn/m) | 25-32 |
| PH | 6.5-9 |
| Electrical Conductivity | <1 |
| Fastness parameters | |
| Light | 6-7 |
| Perspiration | 4-5 |
| Washing | 4-5 |
| Wet staining | 4 |
| Dry staining | 4-5 |
| Color | White |
| Suitable fabrics | Cotton, Polyester, Linen, Nylon, Polyester-cotton, Nylon-cotton, any fabric that can do a heat press |
| Compatible print heads | Epson 4720/i3200/i1600/XP600, etc. |
| storage environment | It is recommended to store in a clean, cool, and dry place, with a relative temperature maintained at around 5-40℃ and a relative humidity at around 40-80%. |
| Shelf Life | 12 months |
Usage Method of Micro-precipitated DTF White Ink
The new machine can be directly filled with this ink for use. If the machine used regular white ink before, the printer ink circuit system needs to be cleaned.
The cleaning process is as follows:
1. Empty the remaining white ink in the ink cartridge and start the cycle. To prevent the ink in the ink tube from circulating back into the ink cartridge, the ink cartridge needs to be inverted and allowed to wait for the circulation to complete. Turn off the circulation, then discard the ink that circulates back and add pure water to clean the ink cartridge thoroughly. The filter is not easy to clean thoroughly, so it is recommended to replace it with a new one.
2. Add 300ml to 500ml of pure water to the thoroughly cleaned ink cartridge. Use a syringe to draw the pure water out of the ink damper until the water becomes transparent. Insert it back into the printhead and then perform 2 to 3 filling/ink injection operations on the printing operation software for 20 to 30 seconds. This operation can directly clean the residual ink inside the printhead and the ink capping.
3. After completing the above steps, empty the remaining pure water in the ink cartridge, pull out the ink damper, and use a syringe to draw the remaining pure water from the ink circuit and the ink damper.
4. Then, shake the ink well. Open the ink cartridge and add the micro-precipitated ink. Use a syringe to draw ink to fill the ink damper. When drawing, the opening of the ink damper should face upwards to expel air.
5. Run the printer cleaning program and then print the nozzle inspection until the nozzle inspection status is normal.
non-precipitation DTF white pigment ink
The newly upgraded non-precipitation DTF white pigment ink only needs to be shaken gently before use. The white ink has stronger coverage and can reduce the frequency of downtime for maintenance. It can maintain ink uniformity after long-term use. It is an efficiency guarantee for large-scale production and emergency orders, and meets the DTF printing market’s demand for excellent performance, such as ink fluidity, continuous printing, color vividness, adhesion, and softness.
Key Features:
1. Super Stable! Low sediments! Easier to Stir & Rotate!
2. Fewer & Softer Sediment, easier to shake.
3. It settles more slowly, causing less clogging.
4. High level of whiteness.
5. Longer standby – 15 hours on & off printing without needing to clean the ink pipelines and nozzles.
Parameters:
- Ink Color: white
- Ink Volume: 1L/bottle (customized packing solutions are available)
non-precipitation DTF white ink vs traditional DTF white ink
The non-precipitation DTF white ink solves the core pain points of traditional DTF white ink through technical optimization. It is not easy to clog, reduces the maintenance frequency, and has strong white ink coverage and uniform color. It is very suitable for DTF printing scenarios that pursue efficient, stable, and high-quality output.
The advantages of non-precipitation DTF white ink are as follows:
1. Less line-out
Compared with traditional white ink, non-sedimentary white ink has a smaller particle size and smoother printing, and does not require frequent cleaning of the nozzle.
2. Non-clogging
Traditional white ink is prone to clogging when the machine is shut down for a long time, which shortens the life of the printhead. The new ink can maintain a week or more of non-sedimentary.
3. Simple operation
Traditional white ink needs to be shaken and tapped hard before use to mix the ink well. But the new non-sedimentary white ink only needs to be shaken gently.
4. Cost saving
There will be insufficient white ink concentration in the front section of printing because of the precipitation, resulting in a poor printing effect. The new precipitation-free white ink can achieve a high concentration of pure white from the beginning of printing, without wasting film and ink.
Parameters of non-precipitation DTF White ink
| Product | non-precipitation DTF White ink |
| Physical and chemical parameters | |
| Viscosity (Cp25℃) | 4-6 |
| Surface Tension (mn/m) | 25-32 |
| PH | 6.5-9 |
| Conductivity (ms/cm) | <1 |
| Fastness parameters | |
| Light | 6-7 |
| Perspiration | 4-5 |
| Washing | 4-5 |
| Wet staining | 4 |
| Dry staining | 4-5 |
| Color | White |
| storage environment | Recommended to keep in a clean, cool, and dry place with a temperature around 5- 40 °C, relative humidity around 40-80%. |
| Compatible | Used for Epson 4720/i3200/i1600/XP600, etc. |
| Application | Suitable for cotton, linen, canvas, fleece, natural silk, nylon, blended fabrics, etc. |
| Shelf Life | 12 months |
High concentration DTF ink
High concentration, high color rendering, focus on color expression, by optimizing pigment particle dispersion technology, improve ink concentration, uniform viscosity, in addition, white ink covering power is significantly enhanced, the color saturation of the printed product is higher, the dark area is more distinct, especially suitable for T-shirts, sportswear, trendy brand patterns and other scenes that require strong visual impact.
Key Features:
1. High color reproduction
High-concentration DTF ink prints patterns with full colors and more realistic reproduction, achieving higher-quality printing effects.
2. Lower usage
Compared to ordinary DTF ink, high-concentration DTF ink can save 20% of usage, meaning that using less white ink can achieve a brighter white, which helps reduce costs.
3. Strong covering power
Enhance the clarity and vividness of the printed pattern, and the color saturation is higher.
4. High stability
High-temperature drying does not sublimate, and high-temperature pressing is not easily affected by color change, allowing for the presentation of high-purity color.
Parameters:
- Ink Color: C M Y K W
- Ink Volume: 1L/bottle
Parameters of High concentration DTF ink
| Product | High concentration DTF ink ( heat transfer pigment ink / PET film ink ) |
| Viscosity (Cp25℃) | 4-6 |
| Surface Tension (mN/m) | 25-32 |
| PH | 6.5-9 |
| Electrical Conductivity | <1 |
| Light | 6-7 |
| Perspiration | 4-5 |
| Washing | 4-5 |
| Wet staining | 4 |
| Dry staining | 4-5 |
| Color | C M Y K W |
| Suitable Material | Cotton, Polyester, Linen, Nylon, Polyester-cotton, Nylon-cotton, any fabric that can be done with a heat press. |
| Compatible | Used for Epson 4720/i3200/i1600/XP600, etc. |
| storage environment | Recommended to keep in a clean, cool, and dry place with a temperature around 5- 40 °C, relative humidity around 40-80%. |
| Shelf Life | 12 months |
Regular DTF ink
Ordinary DTF ink has a rich color system, and nine colors of ink are available. It is designed for diversified printing needs, covering standard color gamut and extended spot colors, ensuring natural color transition and accurate restoration of details. Compatible with a variety of fabrics such as cotton, polyester, and blended, it is widely used in T-shirts, sweatshirts, hats, denim, canvas bags, pillows, sportswear, shoes, etc. In addition, the printing performance is stable, making it a reliable choice for daily clothing customization and mass production.
Main Features:
1. The ink has good fluidity and is not easy to clog the nozzle.
2. High color saturation, wide color gamut, vivid printing effect.
3. Water-based pigment ink is environmentally friendly and safe, and harmless to the human body.
4. Stable performance, continuous batch printing is not easy to break the ink.
5. Strong adhesion, the printed pattern is washable, durable, and not easy to fade.
Parameters:
- Ink Color: C M Y K W R G B O
- Ink Volume: 1L/bottle
Parameters of Regular DTF ink
| Product | Regular DTF ink ( heat transfer pigment ink / PET film ink ) |
| Viscosity (Cp25℃) | 4-6 |
| Surface Tension (mN/m) | 25-32 |
| PH | 6.5-9 |
| Electrical Conductivity | <1 |
| Light | 6-7 |
| Perspiration | 4-5 |
| Washing | 4-5 |
| Wet staining | 4 |
| Dry staining | 4-5 |
| Colors | C M Y K W R G B O |
| Suitable Material | Cotton, Polyester, Linen, Nylon, Polyester-cotton, Nylon-cotton, any fabric that can be done with a heat press. |
| Compatible | Used for Epson 4720/i3200/i1600/XP600 printheads, etc. |
| storage environment | Recommended to keep in a clean, cool, and dry place with a temperature around 5- 40 °C, relative humidity around 40-80%. |
| Shelf Life | 12 months |
Why choose KingJet DTF transfer ink?
1. Save usage
Compared with other inks, DTF ink consumes less and costs less.
2. High stability
High color fastness, water resistance, and friction resistance.
3. Environmentally friendly
DTF ink is green and less polluting to the environment.
4. Full colors
DTF ink prints bright colors and clear pattern details.
5. Wide range of uses
DTF ink can be applied to T-shirts, jeans, sweatshirts, and other garments.
DTF ink application
DTF ink (Direct to Film ink) is a printing material designed for DTF film transfer technology. It is widely used in textile printing, including cotton, linen, nylon, polyester, silk, spandex, modal, and blended fabrics, such as T-shirts, sweatshirts, denim, shoes, hats, canvas bags, sportswear, work clothes, pillows, and curtains.
t-shirts
Hoodie
Denim
shoes
hat
Canvas bag
Start Your Business
We would love to speak with you.
Contact us anytime for professional and personalized services.
